SPECIFICATIONS

Working pressure: 0.8Mpa

Working Current: 0.4A-0.6A

Voltage: 220V

Usage: Home DIY

Type: Electric Airless Paint Spray Gun

Type: High Pressure Gun

Spray distance: 100mm

Power Type: Electric

Power: 75W

Paint Spray: 100ml/min

Origin: (Origin )

Model Number: 16003285

Material: Metel + Plastic

Frequency: 50Hz

Feed Type: pressure

Cup Volume: 600ml

Color: Red + White

Certification: CE

Certification: FCC

Capacity: 600ml

Brand Name: sd24

Application: Paint Spray Gun

slate-data-type="image">

Features:

1. A faster, easier way to paint, the accessories also will make your painting jobs easier.
2. No more brushing or rolling.
3. No more compressor is needed.
4. Sprays all kinds of paint, including latex paint, oil-base enamels, water-base paints, house paints and stains.
5. For all painting jobs such as houses, garages, decks, furniture, fencesm indoor or outdoor uses.

Specifications:

Mode: Electric Airless Paint Spray Gun
Material: Metel + Plastic
Color: Red + White
Voltage: 220V
Spray distance: 100mm
Paint Spray: 100ml/min
Frequency: 50Hz
Working Current: 0.4A-0.6A
Capacity: 600mL
Working pressure: >= 0.8Mpa
Power: 75W

Package Listing:

1 x Electric Paint spray gun (EU Plug or UK adapter)
1 x Funnel

Product Pictures

Use operation:

1. Fill the liquid bottle with spray liquid. Connect the 220V power supply, press the switch,
2. If it fails to work normally after starting, try adjusting the knob at the back. The method is: first turn the knob in and then slowly retreat to achieve the lowest sound and the highest pressure. Test the pressure at a distance of 50cm from the nozzle by hand, and it has a strong tingling. (Note: After adjustment, don't adjust it casually)
3. The effective distance of decontamination is 10-15cm between the nozzle and the object. Operate at a downward inclination angle of 45 degrees, and spray repeatedly until the stain is removed.

Maintenance:

1. The spray gun can continue to operate, but care should be taken to avoid damage due to overheating.
2. The sound is normal but no jet, or if the jet is weak or loose, the nozzle is blocked. Unscrew the nozzle to clean up the debris, or use a fine needle to gently twist from the inside to the outside.
3. The injection is normal, but the pressure is insufficient or unstable. You can open the handle cover to check whether the pump's tightening gong is loose.
4. After the work is finished, it needs to spray for a few seconds. After spraying the liquid in the pump, inject a few drops of lubricating oil from the oil hole and spray for a few seconds.
5. This spray gun is a high-pressure impact gun and must not spray on the human body. It should be placed out of the reach of children.